The combined cultivator with dual hydraulic shedder blade (RH and LH). The FUTURA model is our top model, because it is able to work tillages simultaneously on the right and left. Available in three different sizes, it can meet the demands of all types of installations.
The bilateral hydraulic extension of 15-15 cm adapts to the row width, allowing you to cover work areas that vary from a minimum of 140 cm to a maximum of 300 cm.
STANDARD
- Cultivator with 30 x 30 spiral spring and cage roller
- Kit including double pump, tubes, filters, tank and oil
- 55 cm right and left side inter-row blades with single channel joystick for manual, simultaneous emergency blade return.
- 15 + 15cm right and left side extension with 2 quick tractor couplings
- Bulldozer-like tilling spur
- Type H single heat exchanger kit with thermostat
- 21cm ploughshare
- Rear roller mechanical adjustment OPTIONAL
- Depth adjustment wheels with bearings (cannot be installed on Futura 3-5S e 5)
- Hydraulic blades inclination with 4 quick tractor couplings wit fin
- Roller hydraulic adjustment with 2 quick tractor couplings
- Right and lefth hydraulic system of slope and descent with 2 quick tractor couplings to be able to lift the springs of the cultivator of 20 cms and to work only with the side accessories when it needs
With the application of the hydraulic Futura H 5 blade inclination RH LH , the tool dimensions increase by 6.5+ 6,5 cm. With the application of slope and descent system, the tool dimensions increase by 10 +10 cm.
STANDARD
- Cultivator with 30 x 30 spiral spring and cage roller
- Kit including multiplier, double pump, tubes, filters, tank and oil
- 55 cm right and left side inter-row blades with double channel joystick for manual emergency blade return.
- 15 + 15cm right and left side extension with 2 quick tractor couplings
- Bulldozer-like tilling spur
- Double heat exchanger with double thermostat
- Electronic control unit with general alarm
- 21cm ploughshare
- Rear roller mechanical adjustment
Depth adjustment wheels with bearings (cannot be installed on Futura 3-5S e 5) OPTIONAL
- Hydraulic blades inclination with 4 quick tractor couplings wit fin
- Roller hydraulic adjustment with 2 quick tractor couplings
- Right and lefth hydraulic system of slope and descent with 2 quick tractor couplings to be able to lift the springs of the cultivator of 20 cms and to work only with the side accessories when it needs
With the application of the hydraulic blade inclination RH LH , the tool dimensions increase by 6.5+ 6,5 cm. With the application of slope and descent system, the tool dimensions increase by 10 +10 cm.
STANDARD
- Cultivator with 30 x 30 spiral spring and cage roller
- Kit including multiplier, double pump, tubes, filters, tank and oil
- 55 cm right and left side inter-row blades with multifunction joystick for manual emergency blade return.
- 15 + 15cm right and left side extension with multifunction joystick
- Hydraulic roller adjustment with multifunction joystick
- Bulldozer-like tilling spur
- Double heat exchanger with double thermostat
- Multifunction electronic control unit
- 21cm ploughshare
- Depth adjustment wheels with bearings (each) (cannot be installed on Futura 3-5S e 5) OPTIONAL
- Deactivation feeler pin to work with the utensil in the tall grass, to avoid that the feeler pin reenters also when it doesn't need.
- Hydraulic blades inclination with 4 quick tractor couplings or joystick wit fin
- Right and lefth hydraulic system of slope and descent with 2 quick tractor couplings or with joystick to be able to lift thesprings of the cultivator of 20 cms and to work only with the side accessories when it needs
STANDARD
- Cultivator with 30 x 30 spiral spring and cage roller
- Kit including multiplier, triple pump, tubes, filters, tank and oil
- 55 cm right and left side inter-row blades with multifunction joystick for manual emergency blade return.
- 15 + 15cm right and left side extension with multifunction joystick
- Hydraulic roller adjustment with multifunction joystick
- Right and left blade hydraulic inclination with multifunction joystick
- Bulldozer-like tilling spur with fin
- Double heat exchanger with double thermostat
- 16-channel multifunction electronic control unit
- 12-position electro-hydraulic distributor
- 21cm ploughshare
- Depth adjustment wheels with bearings (cannot be installed on Futura 3-5S-5)
- Hydraulic set-up for application of driving accessories on RH and LH sides with 45 lt oil tank.
- PATENTED VALVES NO-STOP OPTIONAL
- Deactivation feeler pin to work with the utensil in the tall grass, to avoid that the feeler pin reenters also when it doesn't need.
- Right and lefth hydraulic system of slope and descent with 2 quick tractor couplings or joystick, to be able to lift the springs of the cultivator of 20 cms and to work only with the side accessories when it needs
With the application of slope and descent
system , the tool dimensions increase
by 10 +10 cm.
