The pole setter is used to arrange palisades
for vineyards, fruit orchards, etc.. Its
structure can work with stressed concrete
poles, wood or iron, with max. heights
of 3.40 m (on request up to 4.5 m).
Universal pole setter with RH side flange on standard holes,
set up for open field caterpillars.
Min. power 50-60 HP.
For tractors without side holes to link the open
field system, a threaded slab can be requested to
be welded onto the tractor frame.
Universal pole setter with 3-point coupling,
suitable for tracked or wheeled
tractors of various sizes.
standard
-
Distributor 4 hydraulic movements for: 115 cm-stroke pole
driver; lateral tilt, lengthwise tilt,
lateral travel (A).
-
Moving parts are protected by greased bushing (B)
-
The pole-setter head is fitted with a hook to remove old or worn
poles (C)
-
To position the pole-setter head perfectly in axis with the pole
and rapidly correct wrong tractor positioning with regards to the
pole to be set, the lateral pole-setter is fitted with an oil-dynamic
upper translator unit with 5cm downstroke (D), the rear polesetter
is fitted with a side translator unit with 30 cm downstroke
(M).
-
Pole resting plate to adapt piston downstrike
to pole height (E) optional
-
4-lever, 8-way electro-hydraulic distributor kit with 8-channel
joystick f
-
Threaded adapter plate to be welded upon tractors which are
non predisposed
-
Counter-brackets for 3-point coupling ( for Bat 3300P)
-
On request, hydraulic system independent of tractor with heat
exchanger (For rear pole layer)
OPTIONAL PIANTAPALI
3-POINT CONTROL UNIT including:
45 L tank, multiplier, 40 L/
min capacity pump, filter and tubes
with 3-point couplings, Type
H double heat exchanger kit with
bulb, Priority flow adjustment
valve 1/2 in cast iron, with manual
variator, Pressure gauge,
Pressure adjustment valve, Pair
of quick couplings (inlet and
outlet) for the application of instruments
.( for lateral pole layer )