Selected optionals summary

Empty Summary

FUTURA ECO SPECIAL

Machine features

  • Cultivator with hydraulic widening, 30x30 loop springs with releasable rods and cage roller
  • Possibility to increase or decrease the number of springs for adapting to different widths of the vineyards. It has a quick release system on springs to eliminate
  • On demand: power take-off high (for rubber-tyred tractors), low (for crawler tractors) or with pumps directly connected to the tractor power take-off (for rubber-tyred and crawler tractors). If it is equipped with ascent and descent system, pumps are directly connected to the tractor power take-off
  • Kit including multiplier double pump, hoses, filter, tank and oil
  • Double heat exchanger with double thermostat
  • Electronic control unit with general alarm
  • 55 cm RH and LH side inter-row blades with double channel joystick for electrohydraulic separately and simultaneously emergency blades return
  • Bulldozer-like tilling spurs
  • 4,5 - 21 - 26 cm ploughshares (to specify during the order)
  • Rear roller mechanical adjustment (each)
  • RH and LH side lateral hydraulic simultaneously widening with 2 quick tractor couplings



 

Contact request

Fille the form to get in touch.
The marked fields with * are required

Configurator

Select model

Model Code Minimum power Springs Widening Machine width Min width row Max width row Weight
Futura ECO special 3S 1113 30 3 15 + 15 75 115 157 680
Futura ECO special 5/7 S 1011 30 5 / 7 30 + 30 112 152 224 830
Futura ECO special 5 1114 40 5 50 + 50 130 170 218 780
Futura ECO special 7 1018 60 7 50 + 50 130 170 250 830
Futura ECO special 9 1019 60 9 50 + 50 130 170 285 880
Futura ECO special 11 1378 60 11 60 + 60 170 210 340 955
Futura ECO special 13 1214 60 13 60 + 60 197 237 370 1030
Futura ECO special 15 1377 60 15 80 + 80 197 237 410 1055
Futura ECO special 17 1215 60 17 100 + 100 210 250 460 1095


Power take-off


Blade/s

Ploughshare

Industry 4.0

Select optionals

Code Description
Pair of short support tubes for springs A and B with resting choker on the frame and fixing pin (for Futura 7 and 9). 1076

Pair of short support tubes for springs A and B with resting choker on the frame and fixing pin (for Futura 7 and 9).

Pair of short support tubes for springs C and D with resting choker on the frame and fixing pin (for Futura 7 and 9). 1077

Pair of short support tubes for springs C and D with resting choker on the frame and fixing pin (for Futura 7 and 9).

Extra charge for folding roller with 2 quick tractor couplings (2 hydraulic cylinders roll-over and adjustment (applicable only when ordering) 1163

Extra charge for folding roller with 2 quick tractor couplings (2 hydraulic cylinders roll-over and adjustment (applicable only when ordering)

Electro-mechaninc adjustment depth holes roller system (optional applicable only when ordering - only for Futura version 3S) 1164

Electro-mechaninc adjustment depth holes roller system (optional applicable only when ordering - only for Futura version 3S)

Hydraulic roller adjustment with 2 quick tractor couplings. 0659

Hydraulic roller adjustment with 2 quick tractor couplings.

Nr. 3 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1328

Nr. 3 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

Nr. 5 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1330

Nr. 5 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

Nr. 7 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1332

Nr. 7 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

Nr. 9 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1334

Nr. 9 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

Nr. 11 adapters in boron steel complete of reversible chisels and RH and LH laterals fins. 1336

Nr. 11 adapters in boron steel complete of reversible chisels and RH and LH laterals fins.

Nr. 13 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1338

Nr. 13 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

Nr. 15 kit adapters in boron steel complete of reversible chisels and RH and LH laterals fins. 1339

Nr. 15 kit adapters in boron steel complete of reversible chisels and RH and LH laterals fins.

Nr. 17 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins. 1340

Nr. 17 adapters kit in boron steel complete of reversible soc and RH and LH laterals fins.

4m power cable (necessary for tractors without 3-pole female socket). 1190

4m power cable (necessary for tractors without 3-pole female socket).

Power cable 4m extension. 1411

Power cable 4m extension.

3m extension cable for single channel and dual-channel joystick. EJOYSCVPL004

3m extension cable for single channel and dual-channel joystick.

Push button for immediate RH rotary brush/mower head wire rotation stop. Applicable only when ordering. 1158/F - D ECO

Push button for immediate RH rotary brush/mower head wire rotation stop. Applicable only when ordering.

Push button for immediate LH rotary brush/mower head wire rotation stop. Applicable only when ordering. 1159/F - D ECO

Push button for immediate LH rotary brush/mower head wire rotation stop. Applicable only when ordering.

RH hydraulic inter-row inclination with 2 quick tractor couplings. The width of the whole machine increases by 5cm. Only when ordering. 0698

RH hydraulic inter-row inclination with 2 quick tractor couplings. The width of the whole machine increases by 5cm. Only when ordering.

LH hydraulic inter-row inclination with 2 quick tractor couplings. The width of the whole machine increases by 5cm. Only when ordering. 0724

LH hydraulic inter-row inclination with 2 quick tractor couplings. The width of the whole machine increases by 5cm. Only when ordering.

Pair of patented RH and LH hydraulic ascent and descent systems with 20cm stroke and 4 quick couplings to the tractor. Overall total dimensions 20cm. Applicable only when ordering. 2014

Pair of patented RH and LH hydraulic ascent and descent systems with 20cm stroke and 4 quick couplings to the tractor. Overall total dimensions 20cm. Applicable only when ordering.

RH blade with clod breaker, fin and feeler 45cm (additionally at the standard blade). 0982

RH blade with clod breaker, fin and feeler 45cm (additionally at the standard blade).

LH blade with clod breaker, fin and feeler 45cm (additionally at the standard blade). 0982/SX

LH blade with clod breaker, fin and feeler 45cm (additionally at the standard blade).

RH blade with clod breaker, fin and feeler 65cm (additionally to standard blade). 0695

RH blade with clod breaker, fin and feeler 65cm (additionally to standard blade).

LH blade with clod breaker, fin and feeler 65cm (additionally to standard blade). 0695/SX

LH blade with clod breaker, fin and feeler 65cm (additionally to standard blade).

RH blade with clod breaker, fin and feeler 85cm (additionally to standard blade). 0696

RH blade with clod breaker, fin and feeler 85cm (additionally to standard blade).

LH blade with clod breaker, fin and feeler 85cm (additionally to standard blade). 0696/SX

LH blade with clod breaker, fin and feeler 85cm (additionally to standard blade).

RH non-stop feeler pin holder. 1160

RH non-stop feeler pin holder.

LH no-stop feeler pin holder. 1161

LH no-stop feeler pin holder.

RH oscillating feeler pin holder adjustable in height. 1085

RH oscillating feeler pin holder adjustable in height.

LH oscillating feeler pin holder adjustable in height. 1086

LH oscillating feeler pin holder adjustable in height.

RH stump cleaner for inter-row kit (remove the fixing plate when installing code 1247 RH vertical wires mower head). 1050

RH stump cleaner for inter-row kit (remove the fixing plate when installing code 1247 RH vertical wires mower head).

LH stump cleaner for inter-row kit (remove the fixing plate when installing code 1248 LH vertical wires mower head). 1051

LH stump cleaner for inter-row kit (remove the fixing plate when installing code 1248 LH vertical wires mower head).

RH sled for terrain with stones or superficial roots. 0483

RH sled for terrain with stones or superficial roots.

LH sled for terrain with stones or superficial roots. 1154

LH sled for terrain with stones or superficial roots.

RH 45cm inter-row plant lifting ploughshare. 1187

RH 45cm inter-row plant lifting ploughshare.

RH 45cm inter-row plant lifting ploughshare with specify stump cleaner. AVOMSQCDP007

RH 45cm inter-row plant lifting ploughshare with specify stump cleaner.

LH 45cm inter-row plant lifting ploughshare. 1188

LH 45cm inter-row plant lifting ploughshare.

LH 45cm inter-row plant lifting ploughshare with specify stump cleaner. AVOMSQCSP020 LH 45cm inter-row plant lifting ploughshare with specify stump cleaner.
RH 55cm inter-row plant lifting ploughshare. 1268

RH 55cm inter-row plant lifting ploughshare.

RH 55cm inter-row plant lifting ploughshare with specify stump cleaner. AVOMSCCDP019

RH 55cm inter-row plant lifting ploughshare with specify stump cleaner.

LH 55cm inter-row plant lifting ploughshare. 1269

LH 55cm inter-row plant lifting ploughshare.

LH 55cm inter-row plant lifting ploughshare with specify stump cleaner. AVOMSCCSP004 LH 55cm inter-row plant lifting ploughshare with specify stump cleaner.
RH plant lifting plough kit with front depth directional wheel.  0702

RH plant lifting plough kit with front depth directional wheel. 

Nota:

The codes 1405, 1046, 0702 e 1767 can be inserted in the configuration but the machine can be equipped with only one option at a time..

LH plant lifting plough kit with front depth directional wheel.  0725

LH plant lifting plough kit with front depth directional wheel. 

Nota:

The codes 1406, 1768, 1047 e 0725 can be inserted in the configuration but the machine can be equipped with only one option at a time..

RH plant lifting plough kit with front depth directional wheel and specify stump cleaner.  AARATROFR060

RH plant lifting plough kit with front depth directional wheel and specify stump cleaner. 

Nota:

The codes 1405, 1046, AARATROFR060 e 1767 can be inserted in the configuration but the machine can be equipped with only one option at a time..

LH plant lifting plough kit with front depth directional wheel and specify stump cleaner.  AARATROFR062

LH plant lifting plough kit with front depth directional wheel and specify stump cleaner. 

Nota:

The codes 1047, 1768, 1406 e AARATROFR062 can be inserted in the configuration but the machine can be equipped with only one option at a time..

RH kit adjustable ground fender cover with shock absorber complete with universal holder support for RH plant lifting plough kit with or without stump cleaner 2047

RH kit adjustable ground fender cover with shock absorber complete with universal holder support for RH plant lifting plough kit with or without stump cleaner

LH kit adjustable ground fender cover with shock absorber complete with universal holder support for LH plant lifting plough kit with or without stump cleaner 2048

LH kit adjustable ground fender cover with shock absorber complete with universal holder support for LH plant lifting plough kit with or without stump cleaner

RH no traction bulldozer-disk diameter 32cm. 0488

RH no traction bulldozer-disk diameter 32cm.

LH no traction bulldozer-disk diameter 32cm. 1157

LH no traction bulldozer-disk diameter 32cm.

Pair of adjustable no-traction universal rounded tiller discs diameter 36cm. 1267

Pair of adjustable no-traction universal rounded tiller discs diameter 36cm.

Pair of universal no traction adjustable ridger bit discs diameter 40cm. 1265

Pair of universal no traction adjustable ridger bit discs diameter 40cm.

RH no traction adjustable serrated ridger 2-discs diameter 40cm complete with cleaner on first disk. 1312

RH no traction adjustable serrated ridger 2-discs diameter 40cm complete with cleaner on first disk.

LH no traction adjustable ridger 2-discs diameter 40cm complete with cleaner on first disk. 1313

LH no traction adjustable ridger 2-discs diameter 40cm complete with cleaner on first disk.

RH starcut blade set with 2 stars. 1419

RH starcut blade set with 2 stars.

LH starcut blade set with 2 stars. 1420

LH starcut blade set with 2 stars.

RH starcut blade set with 3 stars. 1730

RH starcut blade set with 3 stars.

LH starcut blade set with 3 stars. 1731

LH starcut blade set with 3 stars.

Adapter for application of RH driving tools (15cm). 0657

Adapter for application of RH driving tools (15cm).

Adapter for application of LH driving tools (cm15). 1399

Adapter for application of LH driving tools (cm15).

RH fingerstar diameter 54cm for Expo complete with feeler and feeler pin holder (blue - hard). ASTARDEXD034

RH fingerstar diameter 54cm for Expo complete with feeler and feeler pin holder (blue - hard).

LH fingerstar diameter 54cm for Expo complete with feeler and feeler pin holder (blue - hard). ASTARDEXS009

LH fingerstar diameter 54cm for Expo complete with feeler and feeler pin holder (blue - hard).

RH fingerstar diameter 54cm (blue - hard). ASTARDEXD032

RH fingerstar diameter 54cm (blue - hard).

LH fingerstar diameter 54cm (blue - hard). ASTARDEXS007

LH fingerstar diameter 54cm (blue - hard).

RH hydraulic system kit to install driving accessories. Only when ordering. 1341

RH hydraulic system kit to install driving accessories. Only when ordering.

LH hydraulic system to install driving accessories. Only when ordering. 1342

LH hydraulic system to install driving accessories. Only when ordering.

RH mower head complete with adapter, feeler and feeler holder.  1818

RH mower head complete with adapter, feeler and feeler holder. 

LH mower head short wires, complete with adapter, feeler and feeler holder.  1819

LH mower head short wires, complete with adapter, feeler and feeler holder. 

RH hydraulic short wires mower head with gear motor and oscillating adapter.  ATRFCDX022

RH hydraulic short wires mower head with gear motor and oscillating adapter. 

LH hydraulic short wires mower head with gear motor and oscillating adapter.  ATRFCSX012

LH hydraulic short wires mower head with gear motor and oscillating adapter. 

RH hydraulic rotary brush with gear motor and oscillating adapter.  1150

RH hydraulic rotary brush with gear motor and oscillating adapter. 

LH hydraulic rotary brush with gear motor and oscillating adapter.  1151

LH hydraulic rotary brush with gear motor and oscillating adapter. 

RH circular cutter hydraulic kit for 55cm or 65cm inter-row blade. AFRCLEXDX021

RH circular cutter hydraulic kit for 55cm or 65cm inter-row blade.

LH circular cutter hydraulic kit for 55cm or 65cm inter-row blade. AFRCLEXSX007

LH circular cutter hydraulic kit for 55cm or 65cm inter-row blade.


The marked fields with * are required

Table form

Model Code Minimum power Springs Widening Machine width Min width row Max width row Weight
Futura ECO special 3S 1113 30 3 15 + 15 75 115 157 680
Futura ECO special 5/7 S 1011 30 5 / 7 30 + 30 112 152 224 830
Futura ECO special 5 1114 40 5 50 + 50 130 170 218 780
Futura ECO special 7 1018 60 7 50 + 50 130 170 250 830
Futura ECO special 9 1019 60 9 50 + 50 130 170 285 880
Futura ECO special 11 1378 60 11 60 + 60 170 210 340 955
Futura ECO special 13 1214 60 13 60 + 60 197 237 370 1030
Futura ECO special 15 1377 60 15 80 + 80 197 237 410 1055
Futura ECO special 17 1215 60 17 100 + 100 210 250 460 1095